Product Datasheet Catalog Home Family Home Step Search

HBL5125R6W -- Pin and Sleeve Products

Watertight IEC Pin and Sleeve Receptacle, 4P5W, 125A 380-415V

Product Specifications
 Product Type  
 IEC Product Type  Watertight
 Service Style  Standard
 Device  Receptacle
 Amperage  125A
 Voltage  220/380, 240/415V
 Poles and Wires  4 Pole, 5 Wire
 Terminal Accommodations  #2 To # 1/0 AWG copper wire only
 Replacement Interior Number  IN5100EFS
 Hinge Spring  Stainless Steel (300 series)
 Housing  Zytel 101 Nylon
 Mounting Flange  Zytel 101 Nylon
 Mounting Screws  Stainless Steel (300 Series)
 Contact Carrier  High-Impact Thermoset
 Retainer  High-Impact Thermoset
 Terminal Screws  Stainless Steel (300 series)
 Assembly Screws  Stainless Steel (300 series)
 Gaskets  Neoprene
 Cover Arm  Rynite SST35
 Arm Spring  Stainless Steel (17-1 Type)
 Cover  Rynite SST35
 Cover Screw/Rivet  Nickel Plated Brass
 Rotating Sealing Disc  Polycarbonate
 Ground/Phase Sleeve  Brass
 Pin/Sleeve Spring  Beryllium Copper multi-contact insert with silver plating.
 Certification  UL Listed, CSA Certified
 Dielectric Withstand Voltage  Withstands 3,000V AC
 Max Working Voltage  600V AC RMS
 Current Interrupting  Certified for current interrupting at full rated current.
 Short Circuit Withstand  Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the receptacle.
 Temperature Rise  Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
 Endurance  Mechanical: 10,000 cycles, Electrical: 6,000 cycles.
 Impact Resistance  In accordance with UL746C
 Terminal Identification  Terminals identified in accordance with North American and International conventions.
 Product Identification  Identification and ratings are a part of the external label and molded into the receptacle mount.
 Moisture Resistance  Watertight per IEC 60309-1
 Ingress Protection  IP67 Suitability
 Flammability  UL94-5VA and V-0 classification.
 Operating Temperatures  Maximum Continuous: 75 C; Minimum Continuous: -40 C w/o impact.
 UV Resistance  All materials are UV Stabilized.
 Certifications  UL Listed, CSA Certified.
 Device Description  Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
 UPC Number  78358540516
 Weight in LBs  4.25
 Link to Drawing Library  Click here for Library
 Link to PDF Catalog  Click here for Catalog


Front Dimensional Diagram

Side Dimensional Diagram

Powered by SAQQARA