Product Datasheet Catalog Home Family Home Step Search

HBL460B7W -- Pin and Sleeve Products

Watertight IEC Pin and Sleeve Inlet, 3P4W, 60A 3PH 480V

Product Specifications
 Product Type  
 IEC Product Type  Watertight
 Service Style  Standard
 Device  Inlet
 Amperage  60A
 Voltage  3 Phase 480V
 Poles and Wires  3 Pole, 4 Wire
 Terminal Accommodations  #8 To #2 AWG copper wire only
 Replacement Interior Number  IN460DM
 Housing  ZytelÒ 101 Nylon
 Lock Ring  Rynite SST35
 Mounting Flange  Zytel 101 Nylon
 Mounting Screws  Stainless Steel (300 Series)
 Contact Carrier  High-Impact Thermoset
 Retainer  High-Impact Thermoset
 Ground/Phase Pins  Brass
 Terminal Screws  Stainless Steel (300 series)
 Assembly Screws  Stainless Steel (300 series)
 Gaskets  Solid Neoprene
 Certification  UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
 Dielectric Withstand Voltage  Withstands 3,000V AC
 Max Working Voltage  600V RMS (i.e.minimum creepage distance 10 mm minimum)
 Current Interrupting  Certified for current interrupting at full rated current.
 Temperature Rise  Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
 Endurance  5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
 Impact Resistance  Per CSA C22.2 No. 182.1 / UL1682.
 Terminal Identification  Terminals identified in accordance with North American and IEC conventions.
 Product Identification  Identification and ratings are a permanent part of the device housing.
 Moisture Resistance  Watertight per IEC 60309-1
 Ingress Protection  IP 67 Suitability
 Flammability  HB or Better per UL 94 or CSA C22.2 No. 0.17
 Operating Temperatures  Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
 Certifications  UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.
 Device Description  Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
 UPC Number  78358540475
 Weight in LBs  1.8
 Link to Drawing Library  Click here for Library
 Link to PDF Catalog  Click here for Catalog


Front Dimensional Diagram

Side Dimensional Diagram

Powered by SAQQARA