Product Datasheet Catalog Home Family Home Step Search

HBL460C9W -- Pin and Sleeve Products

Watertight IEC Pin and Sleeve Connector, 3P4W, 60A 3PH 250V

Product Specifications
 Product Type  
 IEC Product Type  Watertight
 Service Style  Standard
 Device  Connector
 Amperage  60A
 Voltage  3 Phase 250V
 Poles and Wires  3 Pole, 4 Wire
 Terminal Accommodations  #8 To #2 AWG copper wire only
 Cord clamp range  .500" To 1.450"
 Replacement Interior Number  IN460DF
 Housing  ZytelÒ 801 Nylon
 Contact Carrier  High-Impact Thermoset
 Retainer  High-Impact Thermoset
 Terminal Screws  Stainless Steel (300 series)
 Assembly Screws  Stainless Steel (300 series)
 Gaskets  Solid Neoprene
 Cord Clamps  Rynite SST35
 Grommet/Glands  Solid Neoprene
 Cover Arm  Rynite SST35
 Arm Spring  Stainless Steel (17-1 Type)
 Cord Clamp Screws  Stainless Steel (300 Series)
 Clamp Nut  Nickel Plated Brass
 Cover  Rynite SST35
 Cover Screw/Rivet  Nickel Plated Brass
 Rotating Sealing Disc  Polycarbonate
 Ground/Phase Sleeve  Brass
 Pin/Sleeve Spring  Beryllium Copper multi-contact insert with silver plating.
 Certification  UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors, UL Standard UL1682 & UL1686C2, CSA Certified File LR280C for Plugs, Connectors and Inlets, LR285C for Receptacles, CSA Standard C22.2 No. 182.1, UL Classified to IEC60309-1, IEC
 Dielectric Withstand Voltage  Withstands 3,000V AC
 Max Working Voltage  600V RMS (i.e.minimum creepage distance 10 mm minimum)
 Current Interrupting  Certified for current interrupting at full rated current.
 Temperature Rise  Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
 Endurance  5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles w/o load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles w/o load for 100A and 125A.
 Impact Resistance  Per CSA C22.2 No. 182.1 / UL1682.
 Cord Grip Retention  Per CSA C22.2 No. 182.1 / UL1682.
 Cord Accommodation  Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
 Terminal Identification  Terminals identified in accordance with North American and IEC conventions.
 Product Identification  Identification and ratings are a permanent part of the device housing.
 Moisture Resistance  Watertight per IEC 60309-1
 Ingress Protection  IP 67 Suitability
 Flammability  HB or Better per UL 94 or CSA C22.2 No. 0.17
 Operating Temperatures  Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
 Certifications  UL Listed, UL Standard 498 CSA Certified to CSA Spec. C22.2 No. 182.2 UL Classified to IEC 309-1 and IEC 309-2.
 Device Description  Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
 UPC Number  78358540483
 Weight in LBs  2.95
 Link to Drawing Library  Click here for Library
 Link to PDF Catalog  Click here for Catalog


Dimensional Diagram

Powered by SAQQARA