Killark ECatalog Lighting Home Page

Killark ECatalog Lighting Home Page

Killark is a leading manufacturer of lighting fixtures and systems, designed for broad-based capabilities in wet, harsh and hazardous environments. When selecting a fixture, its ratings should match or exceed requirements based on the application and area of use, including appropriate light sources and the presence of hazardous or corrosive elements.

Fixtures utilizing Incandescent lamps include metallic and non-metallic types for use in wet/harsh and certain hazardous locations, as well as explosion-proof models for Class I, Division 1 (Groups A, B, C, D) areas, plus portable incandescent hand lamps.

Fixtures utilizing Compact Fluorescent lamps include corrosion resistant non-metallic series and compact or full size enclosed & gasketed styles for standard and certain hazardous locations. Explosion-proof fixtures and hand lamps housing compact fluorescent lamps are also available.

Fixtures utilizing HID Sources include compact and ‘restricted breathing’ models for medium base lamps and full size versions for mogul base lamps. Use in wet, NEMA 4X (hose down & corrosion resistant) and certain hazardous locations. Also featured are explosion-proof fixture types for medium base and mogul base lamps.

Fixtures utilizing Linear Fluorescent lamps include metallic and non-metallic fixtures and exit lights for wet, NEMA 4X and certain hazardous areas. Explosion-proof series are suitable for use inside paint spray booths.

Floodlights & Wall Mount Fixtures range from quartz lamp types for standard locations to floods in aluminum or stainless steel for wet and marine applications. Explosion-proof HID trunnion mount and portable floodlights, plus wall pack HID, complete this category.

Emergency Strobe Signal Lighting includes a compact strobe for wet and certain hazardous locations plus an explosion-proof strobe signal unit also rated for NEMA 4X and marine service.

Emergency Lighting (Battery Backed) Fixtures include enclosed & gasketed compact fluorescent emergency units for NEMA 4X and hazardous locations plus an explosion-proof version. Also available are linear fluorescent in metallic housing, plus an explosion-proof fixture utilizing high intensity halogen lamps.

Fixture Hangers, Fittings and Adapters include ball joint, hook/loop and flexible mount hangers plus explosion-proof combination splice box/hangers and flexible pendant fixture hangers. Also featured are pendant sealing fittings and adapters for retrofitting Killark HID fixtures to competitors ceiling or wall mount splice caps.

Fixtures with Cenelec-European Ratings include "Certificate of Conformity" compact Zone 2 units and Zone 1 rated units for medium and mogul based sources, plus models for use with incandescent and compact fluorescent lamps. Also available are HID floodlights (restricted breathing construction) for Zone 2 areas in aluminum or stainless steel, as well as Zone 1 rated floods and non-metallic linear fluorescents.

Photos and descriptions following are of Lighting Products utilizing Incandescent Lamps, to guide in your selection process.

V Series Incandescent Fixtures Use for task and general lighting in standard and wet locations
	Copper-free aluminum with epoxy/polyester finish Compact, durable, modular design fixture Models for NEMA 4 and certain hazardous locations

NV Series Non-Metallic Incandescent Fixtures Use for task and general lighting in corrosive environments
	Molded from 30% glass-filled thermoplastic polyester For wet, NEMA 4X and marine applications

EMI Series Incandescent Fixtures Use where explosion-proof and NEMA 4X & Marine rated fixtures are required
	Compact in size with “wireless design” for fast installation Factory sealed – no external seal needed Full range of accessories including exit signs and inner colored globes

DV Series Incandescent Fixtures Use for lighting in dust-ignition proof (Class II Div.1) locations
	Copper-free aluminum with epoxy/polyester finish Compact, durable, instant-on

H Series Incandescent Fixtures Use where infrequent lighting of Class I, Div. 1 areas is required
	Copper-free aluminum with epoxy/polyester finish For mogul base 300 or 500 watt lamps

E Series Incandescent Fixtures Use for general or task lighting where Group A or Group B gases are present
	Copper-free aluminum with epoxy/polyester finish For medium base 200 or 300 watt lamps

XHL Series Handlamps Use as supplementary illumination source in Class I, Div. 1 hazardous locations
	Phenolic handle for long service in rugged conditions Aluminum guard with heat & impact resistant globe Supplied with 100 watt rough service lamp Grommets included for use with user furnished SO cable

Photos and descriptions following are of Lighting Products utilizing Compact Fluorescent Lamps, to guide in your selection process.

NVQ Series Non-Metallic Compact Fluorescent Fixtures Use for task and general lighting in corrosive environments
	Molded from 30% glass-filled thermoplastic polyester For wet, NEMA 4X and certain hazardous locations Furnished with 18W compact fluorescent lamp

MBF Series Compact Fluorescent Fixtures Use for lighting wet, harsh (NEMA 4X & Marine), and certain hazardous locations
	Copper-free aluminum with epoxy/polyester finish External hardware is 316 grade stainless steel Compact and rugged design Furnished with lamps (up to 39W)

VBF/VQF Series Compact Fluorescent Fixtures Use for lighting wet, harsh (NEMA 4X & Marine) and certain hazardous locations
	Copper-free aluminum with epoxy/polyester finish External hardware is 316 grade stainless steel Full sized with range of accessories and options, with lamps included World voltage on VQF (120-277VAC; 50/60 Hz)

EBF/EQF Series Compact Fluorescent Fixtures Use where explosion-proof and NEMA 4X & Marine fixtures are required
	Compact in size with “wireless design” for fast installation Factory sealed – no external seal needed Full range of accessories including exit signs and inner colored globes Compact fluorescent lamp included

XHLF Series Compact Fluorescent Handlamps Use as supplementary illumination source in Class I, Div. 1 hazardous locations
	No exposed metal parts Supplied with 26 watt lamp and light shield Grommet included for use with user furnished SO cable

Photos and descriptions following are of Lighting Products utilizing HID Lamps, to guide in your selection process.

MB Series HID Fixtures Use for lighting wet, harsh (NEMA 4X & Marine) and certain hazardous locations
	Copper-free aluminum with epoxy/polyester finish External hardware is 316 grade stainless steel Compact design, for use with medium base HID lamps Restricted Breathing model (lower temperature codes) available

VM Series HID Fixtures Use for area illumination of wet, harsh (NEMA 4X & Marine) and certain hazardous locations
	Copper-free aluminum with epoxy/polyester finish External hardware is 316 grade stainless steel Full sized for mogul base lamps, with range of accessories and options Restricted Breathing model (lower temperature codes) available

EM Series HID Fixtures Use where explosion-proof and NEMA 4X & Marine fixtures are required
	Compact in size with “wireless design” for fast installation Factory sealed – no external seal needed Full range of accessories including exit sign and inner colored globes For use with medium base 35-150W HID lamps

EZ Series HID Fixtures Use where explosion-proof and NEMA 4X & Marine fixtures are required
	Full sized with “wireless design” for fast, easy installation Factory sealed – no external seal needed Five mounting styles and options including HPS instant restart and ballast protection circuit plus Quartz emergency lighting For use with mogul base 50-400W HID lamps

Photos and descriptions following are of Lighting Products utilizing Linear Fluorescent Lamps, to guide in your selection process.

DBF Series Linear Fluorescent Fixtures Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution from a linear type light source are required
	Sheet steel 20 gauge housing with continuous weld Electrostatically applied polyester finish Silicon rubber gasketing and heat tempered glass lens

SSHZ Series Linear Fluorescent Fixtures Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution are required
	Seamless housing of 20 gauge 304 grade stainless steel External hardware of stainless steel Continuous silicone gasketing and heat tempered glass lens Acrylic lens option

HFX Series Linear Fluorescent Fixtures Use in classified Class I, Div. 1 areas such as inside paint spray booths
	Copper-free aluminum construction with external stainless steel hardware Factory sealed – no external seals required UL Listed & labeled for use inside paint spray booths and rooms Spring loaded sockets with relamping from either end Slide out ballast tray for easy maintenance

LZ2N Series Non-Metallic Linear Fluorescent Fixtures Use for lighting in corrosive environments and in certain hazardous locations
	Housing is one piece fiberglass reinforced polyester Lens of clear impact resistant polycarbonate World voltage (most models) 120-277V, 50/60Hz 2’ and 4’ models available

LLN2/LLN1 Series Non-Metallic Linear Fluorescent Fixtures Use for lighting in corrosive environments and in certain hazardous locations
	FRP housing with single piece polycarbonate lens Single point latching mechanism LLN2 for North American Zone 2 applications, LLN1 for Zones 1& 2 Mounting accessories (such as suspension & ceiling mounts) available

LLC Series Non-metallic Compact Linear Fluorescent Fixtures Use for task lighting or exit fixture in corrosive and certain hazardous areas
	FRP housing with single piece low glare polycarbonate lens Exit sign decals apply to clear lens LLC Series for North American Zone 2 applications

Photos and descriptions following are of Lighting Products including Floodlights and Wall Mount Fixtures, to guide in your selection process.

QL Series Quartz Floodlights Use in standard locations to provide maximum light output with low initial cost
	Cast aluminum housing with heat dissipating fin system Tempered glass lens assembly with high temperature gasketing Accommodates up to 1500W quartz lamps

KF Series HID Floodlights Use for Wet/Marine/Shipboard applications plus in Class I, Div. 2 locations
	Housing of copper-free aluminum with corrosion resistant bronze finish All external hardware is stainless steel with continuous silicone gasketing Accommodates 150-1000W long life HID lamps

KFSS Series HID Marine Floodlights Use for Wet/Marine/Shipboard applications plus in Class I, Div. 2 locations
	Type 316 stainless steel housing for maximum corrosion resistance Quick release SS lens latches, SS lens door chains, SS mounting yoke Accommodates 150-400W long life HID lamps

EZ Series HID Trunnion Mount Floodlights Explosion-proof & NEMA 4X rated fixture provides directional lighting in both vertical & horizontal planes when used with floodlight mounting hardware
	Copper-free aluminum housing with powder epoxy finish Factory sealed – no external seal needed Accommodates 50-400W long life HID lamps

EM/DM HID Portable Floodlights Provides emergency or maintenance lighting in wet and Class 1, Div. 1 areas
	Copper-free aluminum housing with safety yellow finish Strong base provides stability and temporary wall mounting Factory sealed 100 foot 16/3 SOW cord and HID lamp included

KWP Series HID Wallpack Luminaries Use where pleasing aesthetic appearance and suitability for NEMA 4X and Class I, Div. 2 locations, in a compact energy saving fixture, are requirements
	Copper-free aluminum construction with bronze finish Lens thermal shock and impact resistant prismatic borosilicate glass Accommodates 70-175W long life HID lamps

Photos and descriptions following are of Lighting Products including Emergency Strobe Signal Lighting, to guide in your selection process.

GSH Series Compact Strobe Signal Lights Use as visual warning or status device in wet and certain hazardous locations
	Aluminum housing with polycarbonate lens High intensity Xenon flash lamp provides 400 candela with 60 flashes/min Four different globe colors. Can mount with globe in up or down position

ESX Series Strobe Signal Lights Use as visual warning device for Explosion-proof, NEMA 4X and Marine duty
	Copper-free aluminum housing with epoxy/polyester finish High intensity strobe provides up to 200 candela with 85 flashes/min Five different globe colors with four mounting styles

Photos and descriptions following are of Lighting Products including Emergency Lighting (Battery Backed) Fixtures, to guide in your selection process.

DEB/VEB/VEQ Series Compact Fluorescent Emergency Lighting Fixtures Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous locations and for NEMA 4X applications
	Continuous lighting under normal power with battery backup during power outages, or ‘emergency only’ units that operate when power fails LED charging indicator light plus exit accessory Copper-free aluminum housing with epoxy/polyester finish World voltage (120-277V, 50-60 Hz) available on VEQ Series

EEQ Series Compact Fluorescent Emergency Lighting Fixtures Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof and NEMA 3 rated fixtures
	Continuous lighting under normal power with battery backup during power outages, or ‘emergency only’ units that operate when power fails LED charging indicator light plus exit accessory Copper-free aluminum housing with epoxy/polyester finish

DBFE Series Linear Fluorescent Emergency Lighting Fixtures Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous and NEMA 4 rated locations that require even light distribution
	Lighting under normal power with battery backup when power fails Sheet steel 20 gauge housing with continuous weld Electrostatically applied polyester finish with heat tempered glass

EBB Series Halogen Lamp Emergency Lighting Fixtures Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof fixtures
	Lighting under normal power with battery backup when power fails Three high intensity lamps can be independently adjusted Remote test station (included) for fixture testing at ground level Copper-free aluminum housing with epoxy/polyester finish

Photos and descriptions following are of Lighting Products including Fixture Hangers, Fittings and Adapters, to guide in your selection process.

FKA/FH Series Fixture Hangers Use to hang fixtures (up to 125 pounds) in standard locations
	Ball joint permits fixture to hang plumb. Allows swing up to 20 degrees Copper-free aluminum with set screw to lock fixture stem in place FH Series serves as combination splice box and flexible hanger

Hook/Loop and FH Series Fixture Hangers Use to hang fixtures (up to 125 pounds) in standard locations
	Hook/Loop hanger consists of a hook and safety bar, which allows conversion to a loop configuration as necessary FH Hook is an economical hanger for pendant fixtures

V Series Hanger Boxes and Covers Use to hang fixtures (up to 125 pounds) in standard and wet locations
	Combines splice box (in four configurations) and hanger in one unit Flexible hanger cover is cushioned to absorb shock and vibration Copper-free aluminum with set screw to lock fixture stem in place

HXB/XFH Series Fixture Hangers Use to hang fixtures (up to 125 pounds) in Class I, Div. 1 hazardous areas
	Combines splice box and hanger in one unit HXB Series with four hubs in ‘X’ configuration. XFH for through feed Copper-free aluminum with set screws to lock fixture stem in place

EKJ Series Flexible Pendant Fixture Hangers Suspends fixtures (up to 125 pounds) in Class I, Div. 1 hazardous & wet areas
	Permits fixtures to swing freely and to hang plumb Constructed of seamless bronze hose with brass outer braid and jute liner Provides electrical ground continuity without bonding jumper

JL/JAL Series Fixture Hangers Use to hang fixtures (up to 125 pounds) in Class I, Div. 1 hazardous areas
	Combines splice box and hub cover for mounting pendant fixtures Conduit openings in straight through or four hub configurations Copper-free aluminum with set screws and integral mounting lugs

ENY Pendant Seal Fittings Use to meet code requirements of a safety set screw when hanging fixtures
	Copper-free aluminum with set screws on each end For Class I, Div. 1 applications. Supports up to 125 pounds

VM Series Fixture Adapters Use to upgrade existing Crouse-Hinds&Reg; fixture cap to new Killark HID, compact fluorescent, or emergency units
	Patented design. For NEMA 4X and certain hazardous locations

EAC/EZBA Series Fixture Adapters Use to upgrade existing Crouse-Hinds&Reg; Explosion-proof units to Killark
	Converted fixtures easily removed for service using EZ mounting system

Photos and descriptions following are of Lighting Products including Fixtures with Cenelec-European Ratings, to guide in your selection process.

ECJ Series Cenelec Rated Fixtures Use where ‘restricted breathing’ type, Zone 2 area fixture is required
	Compact size and low weight Painted copper-free aluminum with stainless steel external hardware

EM/EB/EQ Series Cenelec Rated Fixtures Use where European “Certificate of Conformity” is required for Zone 1 areas
	Compact size fixture, with special ground lug and labeling Utilizes bi-pin & quad-pin compact fluorescent lamps, as well as medium base incandescent and HID (35-150W) lamps.

EZ Series Cenelec Rated Fixtures Use where European “Certificate of Conformity” is required for Zone 1 areas
	Full size fixture, with special ground lug and labeling Utilizes HID (50-400W) lamps

MIC/MAX Series Cenelec Rated HID Floodlights Use where ‘restricted breathing’ type, Zone 2 area floodlighting is required
	Highly efficient asymmetric reflector design Copper-free aluminum body, glass lens, stainless steel fasteners

800N Series Cenelec Rated HID Stainless Steel Floodlights Use where ‘restricted breathing’ type, Zone 2 area floodlighting is required
	Highly efficient asymmetric reflector design Marine grade stainless steel body with toughened safety glass

EVO Series Cenelec Rated HID/Tungsten Halogen Floodlights Use where floodlighting is required in Zone 1 areas
	Offers optimum lighting levels with minimum maintenance costs Copper-free aluminum body, toughened glass window, SS fasteners

LLI2/LLIE2 Series Cenelec Rated Non-Metallic Linear Fluorescent Fixtures Use where Cenelec Zone 2 fixtures are required for corrosive conditions
	FRP housing with single piece polycarbonate lens Available as emergency fixture with battery backup and self-testing/self-diagnostic electronics with LED status display

LLI1/LLIE1 Series Cenelec Rated Non-Metallic Linear Fluorescent Fixtures Use where Cenelec Zone 1 fixtures are required for corrosive conditions
	FRP housing with single piece polycarbonate lens Available as emergency fixture with battery backup and self-testing/self-diagnostic electronics with LED status display